Dell XPS M2010 - Page 34


17. Starting at the top of the panel, remove the black display bezel from around the LCD panel by carefully prying it loose.

18. On the silver display inlay, remove four M2.5 x 5-mm screws from the holes labeled "A" and twelve M2.5-mm shoulder screws from the remaining holes.

19. Starting at the top of the panel, remove the silver inlay from around the LCD panel by carefully prying it loose.

20. On the rails that hold the LCD panel to the display, remove four M2 x 3-mm screws from the left rail, four M2 x 3-mm screws from the right rail, and two
M2 x 3-mm screws from the bottom rail.
NOTICE: When working on the display, be careful not to touch the camera. The glass on the camera is fragile.
1
black display bezel
2
camera
3
LCD panel
1
M2.5 x 5-mm screws (4)
2
M2.5-mm shoulder screws (12)
3
silver display inlay
NOTE: Do not remove the screws that hold the display latches in place.
1
M2 x 3-mm screws (10)
2
LCD panel
3
rails