Dell XPS M2010 - Page 38


1. Attach the left fan to the computer frame using three M2.5 x 5-mm screws.

2. Route the left fan cable under the notch on the frame.

3. Connect the left fan cable to the system board connector (JFAN1).

4. Attach the right fan to the computer frame using three M2.5 x 5-mm screws.

5. Route the right fan cable under the notch on the frame.

6. Connect the right fan cable to the system board connector (JFAN2).

7. Replace the top cover (see Replacing the Top Cover).

8. Replace the cosmetic covers (see Replacing the Cosmetic Covers).

9. Firmly attach the keyboard to the computer and close the display (see Closing the Display).

10. Turn the computer upside down and replace the system battery (see Replacing the System Battery).
Back to Contents Page
1
microphone cable
2
microphone cable connector
3
system board connector
1
M2.5 x 5-mm screws (3)
2
fan cable
3
notch in frame
4
system board connector (JFAN1)
5
left system fan


NOTICE: To avoid damage to the keyboard, ensure that you attach the keyboard securely before moving the computer.