Dell XPS M2010 - Drive Panel


6. Slide the hard drive into the hard-drive bay until it clicks securely into place.

7. Connect the power cable to the hard drive.

8. Connect the hard-drive data cable to the hard drive.

9. Replace the computer cover (see Replacing the Computer Cover).

10. Connect your computer and devices to electrical outlets, and then turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
Drive Panel


1
hard drive
2
hard-drive bay
NOTICE: Ensure that all connectors are properly cabled and firmly seated.
1
power cable
2
data cable
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.