Removing the Drive Panel
1. Follow the procedures in Before You Begin.
2. Remove the computer cover (see Removing the Computer Cover).
3. Grasp the drive-release latch and slide it towards the base of the computer until the drive panel snaps open.
4. Pivot the drive panel outward and lift it from its side hinges.
5. Set the drive panel aside in a secure location.
Installing the Drive Panel
1. Follow the procedures in Before You Begin.
2. Remove the computer cover (see Removing the Computer Cover).
3. Align the drive panel tabs with the side-door hinges.
4. Rotate the drive panel toward the computer until it snaps into place on the drive panel.
5. Replace the computer cover (see Replacing the Computer Cover).
To Next Page
Loading...
