Dell XPS M2010 - Enabling S;PDIF Digital Audio in Cyberlink Powerdvd; Enabling S;PDIF Digital Audio in the Windows Audio Driver; Setting up the Cyberlink (CL) Headphones

Using Multimedia 47
The multi-channel analog audio I/O ports are used to connect:
•7.1 speakers
• 5.1 speakers with line input
• Monaural/stereo microphones
• External audio sources
• MP3 players
• Tape decks
NOTE: Some video and audio cables for connecting your computer to a TV or other audio device may not be
included with your computer. Cables and TV/digital audio adapter cables are available for purchase from Dell.
Enabling S/PDIF Digital Audio in Cyberlink PowerDVD
NOTE: The Cyberlink S/PDIF setting is available only if Cyberlink PowerDVD is installed on your computer.
1 Click Start → All Programs → PowerDVD DX .
2 Click Settings .
3 Click Audio Settings .
4 Click Speaker Environment , and then click SPDIF .
5 Click Apply once, and then click Apply again to return to the main menu screen.
Enabling S/PDIF Digital Audio in the Windows Audio Driver
1 Double-click the speaker icon in the Windows notification area.
2 Click the Options menu and then click Advanced Controls .
3 Click Advanced .
4 Click S/PDIF Interface .
5 Click Close .
6 Click OK .
Setting Up the Cyberlink (CL) Headphones
NOTE: The CL headphone feature is available only if Cyberlink PowerDVD is installed on your computer.
1 Click Start → All Programs → PowerDVD DX .
2 Click Settings .
3 Click Audio Settings .
4 Click Speaker Environment , and then click Headphones .
5 Click Output Mode and select the CL Headphone option of your preference.
book.book Page 47 Tuesday, February 13, 2007 1:50 PM