DeLonghi DC76T - Delaying the Brewing Cycle

NOTE: Unplugging the unit will reset the clock to 12:00.
DELAYING THE BREWING CYCLE
Clock/timer
Digital Display
To preset your coffee maker to brew at a later time first verify that the clock is
set to the correct time. See section on “How to Set the Clock”.
Press and hold the Program Button. While continuing to hold the Program
Button, press the Hour Advance Button until the desired brew time hour is
reached. Then press the Minute Advance Button until the desired minute has
been reached. The AM and PM indicators are on the left side of the digital
clock readout. Release the Program Button.
Press the Power Select Button once. The Auto Start Light will illuminate,
indicating that the coffee maker is waiting for the preset brew time to be
reached before it will begin the brewing cycle.
Note: If the “ON” button is pressed once for AUTO before presetting
time with the PROGRAM Button, brew preset feature will NOT activate.
Auto Light
Brew Select Butto
"ON" Light
"ON" Button
Auto Start Light
Program Button
Minute Advance
Hour Advance
Clock/timer
Digital Display