AMBIENT THERMOSTAT
ELECTRICAL CONNECTION
- Before plugging into the mains, make sure the voltage of your mains supply corresponds to
the value in Volts indicated on the appliance.
-Make sure the mains socket is rated at 10/16 Amps.
- THIS APPLIANCE COMPLIES WITH DIRECTIVE 89/336/EEC AND D.M. 476/92 ON
ELECTROMAGNETIC COMPATIBILITY.
INSTALLATION
The appliance is designed for portable use only.
OPERATION AND USE
Models with function selector and thermostat
- Summer mode (ventilation only): turn the thermostat clockwise as far as it will go to the /6 posi-
tion.
- Low power operation: turn the function selector to position 1 (the pilot light switch on).
- High power operation: turn the function selector to position 2.
- Switching off: turn the function selector to the ” ● “ position and the thermostat knob to the
position, then unplug from the mains.
Thank you for choosing this De’Longhi fan heater. To get the very best out of yuor new
fan heater it is advisable to read these instructions before using it. This will ensure that you
gain optimum results and use the appliance safely.
To Next Page
Loading...
Need help?
General