Need help?Do you have a question about the DeLonghi KENWOOD multione KHH30 Series and is the answer not in the manual?
General| Power | 1000W |
|---|---|
| Speeds | Variable |
| Voltage | 220-240V |
| Weight | 5.2 kg |
| Body Material | Plastic |
| Bowl Material | Plastic |
| Product Type | Food Processor |
Remove the outlet cover from the mixer's drive housing.
Turn the drive coupling clockwise to detach it.
Unscrew the single screw that secures the top cover.
Use a plastic spatula to free clips around the top cover and remove it.
Remove the M5 nut and medium speed outlet pulley.
Remove the 4 screws securing the chassis to the lower body.
Unscrew the base moulding, disconnect PCB leads, and detach the PCB.
Lift out the gearbox and motor as a complete assembled unit.
Remove gearbox cover, planet gear, and ring gear components.
Remove hinges to separate the main body mouldings.
Detach fascia, control module screw, and head lift lever assembly.
To Next Page
