DeLonghi Nespresso VERTUO LATTISSIMA - Setting the coffee volume; Reset to factory settings

26
14
Seing the coee volume
1. Programming the coee volume is specific to each capsule type: Espres-
so, Double Espresso, Gran Lungo, Mug or Carafe.
2. Open the machine, insert the capsule you want to program; close the
machine; turn the lever towards the locked position . Light will blink
while the machine is heating up. A steady light indicates the machine is
ready.
3. Then press and hold the buon until desired volume is reached.
4. A new coee volume is now stored for the capsule type used during the
seing.
Note: once a customer-specific volume is programmed by the user, every
time that capsule type is inserted in the machine, the preparation will stop
at the user-programmed cup size.
Note: if you wish to return to the default parameters see “Reset to facto-
ry seings” section.
15
Reset to factory seings
1. Plug the power cord.
2. Make sure that no accessory ( milk carafe or descaling pipe ) is connected
to the milk carafe connector door. Turn on your machine.