7
Control panel
DESCRIPTION OF THE CONTROL PANEL
1 Air conditioning symbol
2 Dehumidifying symbol
3 Fan symbol
4 SMART symbol
5 BOOST symbol
6Temperature indicator
7 Timer symbol
8 Alarm symbol
THE CONTROL PANEL
12
1
6
8
9
2
5
3
4
7
11
10
12
13
14
15
16
16
9SLEEP symbol
10 AUTOFAN indicator
11 Speed indicator
12 MODE button (selects the modes)
13 BOOST button
14 FAN button
15 ON/Standby button
16 Increase (+) and decrease (-)
temperature button
OPERATING FROM THE CONTROL PANEL
The control panel enables you to manage all the main functions
of the appliance, but to fully exploit its potential, you must use the
remote control unit.
TURNING THE APPLIANCE ON
• Plug into the mains socket. Two lines appear on the display
indicating that the appliance is in standby mode.
•Press the (15) button until the appliance comes on. The
last function active when it was turned off will appear.
Never turn the air conditioner off by unplugging from the mains. Always press the
button, then wait for a few minutes before unplugging. This allows the appliance to
perform a cycle of checks to verify operation.
✔
To Next Page
Loading...
Need help?
General
