DeLonghi Tasciugo AriaDry DEM 10 User Manual

15
ENGLISH
How to dehumidify
How to dehumidify
1) Plug the appliance into a mains socket.
2) Make sure the “tank full/tank missing” light is off. If it is on, position the tank correctly or
empty it.
3) Turn the humidistat dial to one of the positions between OFF and CONTINUOUS. The ON light
indicates that the appliance is dehumidifying. With the humidistat turned to "CONTINUOUS",
the appliance is on all the time.
Dehumidifying/low-temperature
standby light
Humidistat
dial
Tank full/tank missing light
ON light
To easily select the right humidity level, we suggest you operate as follows:
Turn the humidistat dial clockwise as far as it wil go to the continuous position.
Leave the unit on this seting until signs of excess moisture (e.g. condensation on windows)
decreases. This can take several weeks at this point slowly turn the humidistat knob anti-
clockwise until the appliance switches off. The dehumidifier will then keep the humidity at the
selected level automatically.

DeLonghi Tasciugo AriaDry DEM 10 Specifications

General

Airflow	100 m³/h
Placement	Floor
Noise level	38 dB
Certification	CE
Product color	White
Number of speeds	1
Water tank capacity	2 L
Refrigerating medium	R134a
Humidity control type	Stepless
Water level indicator	Yes
Dehumidifying capacity (max)	10 l/24h
Suitable for room volume up to	50 m³
Power control	Electronic
AC input voltage	230 V
AC input frequency	50 Hz
Power requirements	AC
Power consumption (typical)	180 W
Operating temperature (T-T)	2 - 30 °C
Operating relative humidity (H-H)	30 - 95 %
Package depth	300 mm
Package width	360 mm
Package height	490 mm
Package weight	11000 g
Quantity per pallet	32 pc(s)
Quantity per master (outer) case	1 pc(s)

Weight and Dimensions

Depth	260 mm
Width	330 mm
Height	415 mm
Weight	10000 g