DeLonghi TCH8093ER Instructions

2
A) If your appliance comes tted with a plug, it will incorporate a 13 Amp fuse. If it does not t your socket, the plug should
be cut o from the mains lead, and an appropriate plug tted, as below.
WARNING: Very carefully dispose of the cut o plug after removing the fuse: do not insert in a 13 Amp socket elsewhere
in the house as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-
on type, the fuse cover must be re-tted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In
the event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your
nearest electrical
dealer. The colour of the correct replacement fuse cover is that as marked on the base of the plug.
B) If your appliance is not tted with a plug, please follow the instructions provided below.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The blue wire must be connected to the terminal marked with the letter N or coloured black. The brown wire must be connec-
ted to the terminal marked with the letter L or coloured red. If you have a 3-pins plug, do not connect any wire to the
“earth” terminal.
- Voltage and wattage can be found on the rating label on the underside of the machine.
electrical connection (UK only)

DeLonghi TCH8093ER Specifications

General

Type	-
Heating power	2400 W
Heating power (min)	800 W
Adjustable thermostat	Yes
Suitable for room volume up to	70 m³
Product color	Black, White
Placement options	Floor
Heat source	Electric
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	269 mm
Width	275 mm
Height	695 mm