G:04:02 Automatic Transmission
MAINTENANCE AND ADJUSTMENT
Checking and Adding Transmission
Fluid
1.
Place vehicle on level ground and apply parking
brake.
2.
With the selector lever in the PARK position,
start the engine and run long enough to
achieve operating temperature (coolant fans
begin to cycle — A/C off).
3. Check the fluid level with the transmission
selector in the PARK position and the engine
running at idle. The fluid level on the dipstick
should be at the HOT.
4.
If additional fluid is required, add sufficient
fluid through the filler tube to bring the level to
the proper mark on the dipstick. Do not overfill
the transmission.
• •
To Next Page
Loading...
