Delorean DMC - Page 317

PT5
|VfW)
Electrical System and Instruments
DOOR LIGHT SWITCH
pr^
rfTWi
REMOVING - REFITTING - Rg. 54
Removing
• Disconnect electrical connectors (1) from
behind switch (2).
• Remove posi-drive screw (3), being careful not
to loose, spade connector (4), star washer (5)
and nut (6).
Refitting
REVERSE REMOVAL PROCEDURE.
GLOVE BOX LIGHT SWITCH
REMOVING - REFITTING - Fig. 55
Removing
• Open glove box.
• Using a narrow bladed screwdriver carefully
prise the switch (1) from the front edge of the
glove box.
• Disconnect electrical connections (2).
Refitting
REVERSE REMOVAL PROCEDURE.
ENGINE COMPARTMENT SWITCH
REMOVING - REFITTING - Fig. 56
Removing
• Open engine louvre.
• Open engine compartment lid.
• Switch is located far L.H.S. of engine
compartment.
• Disconnect electrical connectors (1).
• Compress retaining clips with fingers and lift
switch (2) out of bracket (3).
Refitting
REVERSE REMOVAL PROCEDURE.
LUGGAGE COMPARTMENT COVER
LIGHT SWITCH
REMOVING - REFITTING - Fig. 57
Removing
• Open Luggage Compartment Cover.
• Using a narrow bladed screwdriver carefully
prise the switch (1) from the hood.
• Disconnect electrical connectors (2).
Refitting
REVERSE REMOVAL PROCEDURE.