Engine
C.04.03
Remove
coolant hoses at engine
Remove
driveshaft
retaining bolts
exhaust cross-over pipe (Fig. 15)
For automatic transmission disconnect oil cooler
hoses at cooler end.
Disconnect gear change control (manual
transmission).
For automatic transmission disconnect cable at
relay lever.
Remove
gear box side mounting bolts (Fig. 16)
(R.H.
illustrated)
Fit lifting sling to rings provided
(Figs.
17& 18) (L.H.S.)
(Figs.
19&20)
(R.H.S.
Take weight off engine and remove both
mounting bolts. Pull engine forward and lift out.
(Fig.
27^
(L.H.S. illustrated)
r
To Next Page
Loading...
