REAR WINDOW SUNSHADE LOUVRE
Removal
1.
With the aid of an assistant, disconnect left
and right gas struts at the sunshade.
2.
While holding sunshade open, remove two
nuts,
each side, securing sunshade to hinges.
3. Remove sunshade and place on workbench.
Remove two sunshade grilles, latch assembly,
and both gas strut mounting balls.
Installation
1.
Transfer all parts to replacement sunshade
assembly.
2.
With the aid of an assistant, position and
secure sunshade to both hinges.
3. Connect both gas struts. Slowly close
sunshade and check alignment and latch
operation.
Adjust as necessary.
1
I
1
1
7
To Next Page
Loading...
