REFITTING
Check oil pump rotation.
Make sure that the release valve plunger and
spring seat are inserted the correct way round.
SPECIAL POINTS CONCERNING REFITTING
Fit in position
the drive gear
and oil pump cover; tighten the driving plate bolts
progressively to make sure that pump gears
revolve freely.
Remove the oil filter and inject some engine oil
through hole (A) with an oil can to prime the oil
pumps.
(Fig.
111)
Fit the oil pump sprocket bolts and the timing
cover bottom bolts with loctite.
Torque tighten the pulley nut after smearing the
crankshaft threads with loctite.
Refit
alternator drive belt and tension
rocker covers
air conditioning compressor
air conditioning drive belt and tension
exhaust muffler
Fill engine with correct quantity of recommended
oil.
Make all necessary adjustments.
f-
':•'(
r!
|
To Next Page
Loading...
