Delphi SA10003 User Manual

Connecting Delphi XM SKYFi
to Your Vehicle With an FM
Modulator
Connect the red (+) lead to the vehicle
12V power terminal, which is powered
when the ignition is in the accessory
position.
The 12V power connecting cord is
permanently connected for SKYFi
™
FM
modulation.
The SKYFi name, XM name, and related logos
are trademarks of XM Satellite Radio Inc.
Radio to the power of X
™
Note: Connect FM modulator ground
terminal to vehicle ground before making any
other connections.
XM Antenna
SKYFi Car Cradle
SKYFi Universal Adaptor
FM Modulator
DELPHI SA 10003
MADE IN MALAYSIA
To ground
Audio In
6V DC In
87.9MHZ
88.5MHZ
88.1MHZ
TO FM
ANTENNA
TO FM
RADIO
12V DC
IN
6V DC
OUT
AUDIO
IN
Frequency switch
+
(red)
(female)
-
(black)
To vehicle
AM/FM
antenna
To vehicle
audio/stereo
To vehicle
12V power
terminal
+
(male) (red)

Delphi SA10003 Specifications

General

Brand	Delphi
Model	SA10003
Category	Modulator
Language	English

Summary

Connecting Delphi XM SKYFi to Your Vehicle With an FM Modulator

FM Modulator Ground Connection

Connect the FM modulator ground terminal to the vehicle ground before making any other connections.

12V Power Connection

Connect the red (+) lead to the vehicle 12V power terminal, which is powered when the ignition is in the accessory position.

Operating the FM Modulator

Turning on the FM Modulator

The FM modulator is always on in standby when the ignition is in the accessory position.

Changing the Transmitting Frequency

Allows changing the XM Satellite Radio broadcast signal to an FM frequency for output to your vehicle radio.

FM Antenna Connection Note

FM antenna connector may need an adapter; some systems require active bias for AM antennas.