Delphin Minor - Delphin Minor Features; Bite Alarm Features; Receiver Features; Device Operation and Setup

RECEIVER / features and properties
-7 different volume settings including silent and vibration mode
-3xAAA 1.5V battery
-LED diode flickers for 10 seconds after a bite
-Up to 110 m reach depending on terrain conditions and battery life
-Memory feature - settings can be stored in memory
even after turning of the appliance
LED diode
LED diodes
Turn on/off button
V button
-Press shortly to set
the volume
Speaker
Speaker
Turn on/off (hold for 2 seconds)
-3 flickers - turned on
-1 flicker - turned off
-Press shortly to set
the speaker volume
BITE ALARM / features and properties
-5 different volume settings including silent mode
-1x 23A 12V battery
-LED diode lights up for 10 seconds after a bite
-Memory feature - settings can be stored in memory
even after turning of the appliance
-Waterproof
PAIRING AND ACTIVATION
1.Turn on the bite alarm you wish to pair while the receiver is off.
2.On the receiver, push the buttons ON/OFF and V simultaneously and hold them until the LED diode lights up. By pressing the V button,
select a desired diode you wish to pair your bite alarm with.
3.Simulate a bite on the bite alarm to pair the receiver (the diode will switch to the next colour, which means the pairing was successful).
4.Keep pressing the V button on the receiver until all the diodes are switched off to end the pairing mode.
5.Turn on the receiver. The devices should be paired by now.
EN: USER GUIDE
Bite alarm set with a receiver
BUTTON PLACEMENT
USER MANUAL
WARRANTY LETTER / * keep it for future reference /
Model: Delphin MINOR set Warranty service:
Date of purchase:
Signature and stamp of the vendor:
Post warranty service: