DELTA DORE TYMOOV radio RP2 Series - Page 13

EN
24 25
15/ Setting stops from the push button (local control)
15.1 Recording 2 automatic stops
Press and hold the push button (> 2 seconds)
so that the motor operates in the up or down
direction.
When the motor detects the 1st stop (upper or
lower), then the motor operates once.
Press and hold the push button (> 2 seconds) so
that the motor operates in the opposite direction.
When the motor detects the 2nd stop (upper or
lower), then the motor operates once.
> 2s
x 1
OR
> 2s
x 2
OR
15.2 Recording rstly an automatic stop then a manual stop
Press the push button (> 2 seconds) so that the
motor operates in the up or down direction.
When the motor detects the 1st stop (upper or
lower), then the motor operates once.
> 2s
x 1
OR
x 3
+
> 2s
> 2s
x 2
+
> 2s
x 2
STOP
OR
Press the push button (> 2 seconds) so that the
motor operates in the opposite direction.
Briey press the push button to stop the motor at
the position corresponding to the manual stop.
Then,
- if the shutter is down: briey press the push
button 3 times, then press and hold the push
button (> 2 seconds)
- if the shutter is up: briey press the push button
2 times, then press and hold the push button (> 2
seconds)
The motor then operates twice to conrm that the
2nd stop is recorded.