DELTA DORE TYMOOV radio RP2 Series - Page 14

EN
26 27
15/ Setting stops from the push button (local control)
15.3 Recording rstly a manual stop then an automatic stop
Press the push button (> 2 seconds) so that the
motor operates in the opposite direction.
When the motor detects the 2nd stop (upper or
lower), then the motor operates once.
> 2s
x 1
OR
x 3
+
> 2s
> 2s
x 2
+
> 2s
x 2
STOP
OR
Press the push button (> 2 seconds) so that the
motor operates in the up or down direction
Briey press the push button to stop the motor at
the position corresponding to the manual stop.
Then,
- if the shutter is down: briey press the push
button 3 times, then press and hold the push
button (> 2 seconds)
- if the shutter is up: briey press the push button
2 times, then press and hold the push button (> 2
seconds).
The motor then operates twice to conrm that the
1st stop is recorded.
15.4 Recording 2 manual stops
x 3
+
> 2s
> 2s
x 2
+
> 2s
x 2
STOP
OR
Press the push button (> 2 seconds) so that the
motor operates in the up or down direction
Briey press the push button to stop the motor at
the position corresponding to the manual stop.
Then,
- if the shutter is down: briey press the push
button 3 times, then press and hold the push
button (> 2 seconds)
- if the shutter is up: briey press the push button
2 times, then press and hold the push button (> 2
seconds).
The motor then operates twice to conrm that the
1st stop is recorded.
> 2s
x 3
+
> 2s
x 2
+
> 2s
x 2
STOP
OR
Press the push button (> 2 seconds) so that the
motor operates in the opposite direction.
Briey press the push button to stop the motor at
the position corresponding to the manual stop.
Then,
- if the shutter is down: briey press the push
button 3 times, then press and hold the push
button (> 2 seconds)
- if the shutter is up: briey press the push button
2 times, then press and hold the push button (> 2
seconds)
The motor then operates twice to conrm that the
2nd stop is recorded.