Delta-q Milk QOOL - Programming Cappuccino Volume

83
MILKQOOL
PROGRAMMING THE COFFEE/CAPPUCCINO AMOUNT
• Adjust the selector to the Cappuccino position (see Fig. 28).
• Raise the lever completely and insert a Delta Q coee capsule in the
capsule holder aperture, arranged in accordance with the aperture
silhouette. Lower the lever completely (see Fig. 9).
Place a Cappuccino cup under the coee extraction nozzle.
• Hold the Milk-based beverage button for 6 seconds, and the Espresso,
long coee and Infusion buttons blinks (see Fig. 27).
• Press the Milk-based beverage button again, thus beginning the
machine preheating process (approximately 25”). When the machine
reaches the temperature, the milk foam extraction begins and when the
desired amount is reached press the Milk-based beverage button again.
The machine memorises this volume and will start extracting it until a
new programme is set.
• Then, the coee extraction begins and, when the extraction reaches the
desired amount, press the Milk-based beverage button again.
The machine memorises this volume and will start extracting it until a
new programme is set.
Note: The programmable maximum volume of the beverage is 220cc.
Fig. 28: Adjust the selector to the
Cappuccino position.