Chapter 6 Writing a Program
6-19
6.5.6
Basic Editing
-
Editing a Comment
(1) Make sure that on the toolbar is pressed. Click the position above a device name, type a comment
in the box, and press Enter on the keyboard.
(2) Make sure that on the toolbar is pressed. Click the position under a network number, and then type
a comment in the box. If users want to start a new line of text at a specific point, they can press
Shift+Enter on the keyboard. Press Enter on the keyboard after the editing is complete.
(3) Write the program shown below in the way described above.
To Next Page
Loading...
