Unpacking the 1-Unit PCS100HV
Use a forklift to move and place the crate containing the PCS and the wooden pallet in a
designated location. Make sure the location is clean and prepared before moving the crate.
WARNING!
The PCS and crate have a combined weight of approximately 300 kg. DO NOT attempt to
lift and/or move the package/unit by hand. The unit is extremely heavy. Attempting to
move the unit by hand may lead to injury, damage, and even possibly death.
WARNING!
Before opening the package, make sure the Tip Tell label is OK. If the Tip Tell label
shows the PCS has toppled and fell, immediately contact Delta and the Shipping
Company.
1.
Use a ladder to reach the top of the PCS.
2.
Remove the screws securing the top cover.
3.
Remove the top cover.
4.
Remove the screws securing the left and right sidewalls from the shipping package.
5.
Remove the right and left sidewalls
6.
Remove the screws securing the front and rear walls from the shipping package.
7.
Remove the front and rear walls.
Figure 9. Removing All Walls of 1-Unit PCS100HV
Upon unpacking the unit, inspect the unit for signs of damages that may have been caused during
shipping. If any sign of damage is found, immediately contact Delta and the shipping company.
To Next Page
Loading...
