Securing a Cabinet in a Final Location
1.
First, insert a washer in the anchoring bolt followed by a nut.
2.
Turn the nut until it is lowered in the bolt. Do not tighten at this time. All nuts must be inserted in their
respective anchoring bolts.
3.
Repeat for the remaining anchoring bolts.
4.
Once all nuts are inserted, tighten the anchoring bolts in ascending order. See the following figure.
5.
Move on to the opposite side of the bolt and tighten the bolt.
6.
Repeat in the same manner for the remaining anchoring bolts.
Figure 19. Securing a Cabinet with Anchoring Bolts
To Next Page
Loading...
