83
QOOL
A.
B.
C.
Fig. 16: Stand by mode.
Stand by Mode
Whenever the equipment is idle for over 10 minutes, it enters “Stand by”
mode. The boiler is turned o and the external surface of the machine
cools down. All button indicator lights on the control panel go out, with
the exception of the Delta Q logotype, which will remain in the Breathing
Light Eect mode (see Fig. 16).
• When the user presses any extraction button again, the equipment
leaves Stand by mode, restarts the heating process and returns to the
“Ready to use” mode in approximately 60” (see Fig. 7).
To Next Page
Loading...
