VIVOTEK
142 - User's Manual
When the Event Status is ON, once an event is triggered by motion detection, the Network Camera will
automatically send snapshots via e-mail.
If you want to stop the event trigger, you can click ON to turn it to OFF status or click Delete to remove a
previously-congured event setting.
To remove a server setting from the list, select a server name and click Delete. Note that you can only
delete a server when it is not involved in an Event setting.
To remove a media setting from the list, select a media name and click Delete. Note that you can only
delete a media when it is not involved in an Event setting.
To Next Page
