Delta Vivotek IB9369 User Manual

VIVOTEK
30 - User's Manual
IMPORTANT:
If DC power is preferred, it should comply with: O/P: 12VDC, 2A min., L.P.S. per IEC
60950-1.
NOTE:
1. If you encounter problems with displaying live view or the onscreen plug-in control, you
may try to remove the plug-ins that might have been installed on your computer. Remove
the following folder: C:\Program Files (x86)\Camera Stream Controller\.
2. If you forget the root (administrator) password for the camera, you can restore the
camera defaults by pressing the reset button for longer than 5 seconds.
3. If DHCP is enabled in your network, and the camera cannot be accessed, run the IW2
or Shepherd utility to search the network. If the camera has been congured with xed IP
that does not comply with your local network, you may see its default IP 169.254.x.x. If
you still cannot nd the camera, you can restore the camera to its factory defaults.
4. If you change your network parameters, e.g., added a connection to a LAN card, re-start
the IW2 or Shepherd utility.

Delta Vivotek IB9369 Specifications

General

Brand	Delta
Model	Vivotek IB9369
Category	Security Camera
Language	English