10
correct use
Working voltage: 230V ±10% 50Hz AC
Immersion heater class I, IP64:
- PTC (Positive Temperature Coefficient) type resistor
- Max. power 300 W, resistive load.
- PVC cable Length 1200 mm
- Schuko plug
technical speciFication
Use the product as shown in fig. 1. Never hang towels or garments onto the outer frame (fig. 2). Incorrect us-
age could cause dangerous overheating and the product’s malfunction.
Do not use chemical products to clean the radiator but just a damp, non-abrasive cloth.
1 2
Safety standards:
- EN60335-1
- EN60335-2-30
- EN60335-2-43
Room conditions:
- Working temperature: from 0 °C to +50 °C.
- Storage temperature: from -20 °C to +70°C.
To Next Page
Loading...