31
INTENDED USE
Your bike is intended to be ridden on paved roads. Please always wear a helmet and follow all
local and common-sense safety. Perform a safety check before and ater EACH ride.
SAFETY CHECK
For your safety, please do the following inspection before and ater each ride.
If you discover any concerns with your bike, please seek professional service or contact us at
cs@bike.com or 877-755-2453 (BIKE) to help resolve any issues.
Make sure your battery is at FULL Charge.
Do a Brake, Wheel and Tire CHECK- Both Front and Rear.
Check tire infl ation, make sure there are no foreign objects or bulges in tires.
Spin Wheels freely and confi rm NO brake rub or wobbles.
Confi rm Wheels are tightened and secured.
Do a BRAKE CHECK - Both Front and Rear.
Lit wheel o ground and spin wheel.
Squeeze brake to insure no rub and immediate stop.
Check Gears by liting rear wheel, rotating crank and shiting gears. Make sure gears move
smoothly and chain is properly lubricated.
Know and understand how all aspects of the eBike components work and be
sure to understand how to accelerate and control the bike along with braking.
If needed adjust the payload for even balance.
If you notice any cracks, dents, or abnormal issues please seek immediate professional support.
Know your area, the local laws and the terrain you are riding on.
The key is not needed to ride or start your bike it is only needed when removing the battery.
To initiate a ride on your monitor press the M button on the let side of the handlebar.
NOTE: If wet or at dawn, dusk, or dark, your riding will be impaired. Do not ride or ride with more caution
You will need to plan for extended braking and possible road differences. Be sure to be visible with lights and safety gear
RIDE with CAUTION and RIDE with SAFETY. Always wear a helmet.
If have any issues above or any concerns, please seek immediate professional support prior to riding your bike.
To Next Page
Loading...