To Next PageTo Next Page
Need help?Do you have a question about the Dennerle Evolution DeLuxe and is the answer not in the manual?
General| Type | External filter |
|---|---|
| Model | Evolution DeLuxe |
| Brand | Dennerle |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Weight | 4.5 kg |
| Suitable for aquariums up to | 200 liters |
| Tank Size | Up to 200 liters |
Crucial safety guidelines for operating the pH-Controller, covering electrical safety and proper usage.
Illustrates a typical setup for a CO2 fertilization system, detailing essential components.
Details of main components like mains lead, power unit, and electrode connections.
Explains the operation of keys like pH, +, -, Auto, Hys, and calibration keys.
Instructions for mounting the pH-Controller display unit on a wall.
Procedure for connecting the display, power unit, and CO2 solenoid valve.
Guidance on positioning the pH-electrode holder within the aquarium.
Steps for connecting the pH-electrode to the main unit.
Final steps to power on the pH-Controller and prepare for initial calibration.
Explains the importance of regular calibration for accurate pH measurements.
Details on preparing calibration solutions and the calibration station.
Step-by-step guide for calibrating the pH-electrode using pH 7 and pH 4 solutions.
Best practices for handling, storing, and maintaining the pH-electrode to ensure longevity.
Information on the expected lifespan of the pH-electrode and factors affecting it.
Recommendations for using high-quality calibrating solutions for accurate measurements.
How the current pH value is displayed in normal operating mode.
Instructions on how to set and confirm the target pH value using the controller.
Procedure to view the currently set target pH value on the controller display.
Explains the chemical relationship between CO2, carbonic acid, and pH in water.
Guidance on achieving optimal CO2 levels and pH for plant growth based on KH.
Determining the appropriate CO2 bubble rate for the specific aquarium conditions.
Enables automatic CO2 content setting based on measured carbonate hardness.
Adjusting hysteresis values to control CO2 supply activation and deactivation points.
Indicates display flashing when pH deviates significantly from the set value.
Information on activating and deactivating the audible alarm function.
Adjusting display and LED brightness to suit ambient light conditions.
Activating the child-proof safety lock to prevent accidental setting changes.
Guide on checking and replacing the internal fuse for the solenoid valve output.
Lists common faults, their causes, and recommended remedies for the pH-Controller.
