1
R
Battery LED
Bluetooth LED
1. Charging
Charge this unit using the included USB cable
before using.
The battery LED indicates the battery charge status.
• Charging: Lights red
• Charging completed: Lights green
It will take approx. 2 hours from empty to full charge. This unit can be used for
approximately 30 hours when the battery is fully charged.
When the rechargeable battery is low, a notification sounds and the battery LED blinks in
red at approx. 3 second intervals.
Charge this unit using the supplied USB cable.
• Press and hold the 1/3 button for 3 seconds or more to turn the Bluetooth function off after
use and preserve the battery.
R
AH-GC25WEM_QSG_JP_00A_190405.indd 1 2019/04/10 14:34:02
To Next Page
Loading...
