• For best picture quality choose the component video connection to your TV. S-video and composite video
outputs are also provided if your TV does not have component video inputs.
•To connect the digital audio output from the TV, you can choose from either the coaxial or optical connections.
If you choose to use the coaxial connection, it needs to be assigned. For more information about Digital Input
Assignment ( page 42).
Connecting a DBS tuner
• For best picture quality choose the component video connection to your DBS tuner. S-video and composite
video outputs are also provided. If you choose to use the component video connection, it needs to be assigned.
For more information about Component Input Assignment ( page 45).
•To connect the digital audio output from the DBS tuner, you can choose from either the coaxial or optical
connections. If you choose to use the coaxial or the optical connection, if needs to be assigned. For more
information about Digital Input Assignment ( page 42).
On screen display for component video outputs and HDMI output
• When viewing component video signals or HDMI signals via the AVC-A11XV, the on screen display is displayed
on the monitor when the “System Setup” operations are performed and when the remote control unit’s ON
SCREEN button is operated.
•To view the on screen display using an HDMI monitor, set “Analog to HDMI Convert” at “HDMI Out Setup”
to “ON” (default).
• When only component video signals are input to the AVC-A11XV or when “Component” is selected at the
“Setting the Video Convert Mode”, the characters of the on screen display are not displayed over the picture.
Connecting equipment with HDMI (High-Definition Multimedia Interface)
terminals [To convert analog video signals to HDMI signals]
• The AVC-A11XV is equipped with a function for converting analog video signals into HDMI signals.
You can do this by either a component or a video or a S-video connection.
• Audio signals are not output from the HDMI monitor output terminal, so also make analog or digital audio
connections. To play sound using digital audio connections, assign the digital terminal (coaxial or optical) at
“Setting the Digital In Assign” ( page 42).
NOTE:
• Use an HDMI monitor compatible with an HDMI input resolution of 480i or 576i.
• If your monitor is not equipped with an HDMI terminal, connect the AVC-A11XV to the monitor using the
component video, S-Video, or composite video terminals.
To Next Page
Loading...
