Denon AVC-A11XV - VIDEO Section; I. MAIN ZONE; SETTING; BEFORE ADJUSTMENT

ENGLISH
19
ENGLISH
Connecting Other Sources Connecting Other Sources
ZONE2 / ZONE3 speaker out connections
• When the power amplifier is assigned to the ZONE2 or ZONE3 output channel at “Power Amp Assign” in the
“System Setup Menu”, the MAIN ZONE speaker terminals can be used as the ZONE2 or ZONE3 speaker out
terminals ( page 49, 50).
• The connections diagram below is an example for when the surround back speaker is assigned to the ZONE2
stereo 2 channel.
In this case, Surround Back Speaker OUT can not be used for MAIN ZONE.
>< <>
><
><
>< >< <><>
<>
IN
(
L
)
(
R
)
(
R
) (
R
) (
L
) (
L
)
(
L
)
(
R
)
Connection terminal
for subwoofer with
built-in amplifier
(subwoofer), etc.
Surround
left speaker
(A)
Subwoofer
Front
right speaker
Surround
left speaker (B)
ZONE2 Front
left speaker
Front
left speaker
Center
speaker
ZONE2 Front
right speaker
Surround
right speaker (B)
Surround
right speaker
(A)
Connecting the pre-out terminals
Power amplifier
R
SURROUND
BACK
L
R
SURROUND
L
R
FRONT
L
CENTER
SUB-
WOOFER
R
L
R
L
B
A
B
A
R
L
R
L
R
L
R
L
A
• Use these terminals if you wish to connect external power amplifier(s) to increase the power of the front,
center, surround and surround back sound channels, or for connection to powered loudspeakers.
• When using only one surround back speaker, connect it to left channel.
Connecting the power supply cord
AC 230V, 50Hz
AC outlets
(wall)
Power supply cord
(Supplied)
NOTE:
• Only use the AC OUTLET for audio equipment. Never use them for hair driers, TVs or other electrical
appliances.
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
AC OUTLET
• SWITCHED (total capacity – 100 W)
The power to the outlet is turned on and off in
conjunction with the POWER switch on the main unit,
and when the power is switched between on and
standby from the remote control unit.
No power is supplied from this outlet when this
unit’s power is at standby. Never connect equipment
whose total capacity is above 100 W.
ZONE2