Denon AVC-A11XV - BU4094 BCF-E2 (IC404) CONNECT P.W.B.; BU4094 BCF-E2 Terminal Function

31
ENGLISH
Basic Operation Basic Operation
ENGLISH
5
Press the CURSOR
DD
or
HH
button to
select the “Bass” or “Treble”.
6
Press the CURSOR
FF
or
GG
button to set
the level.
8
Press the ENTER or SURROUND
PARAMETER
button to complete the
setting.
7
Press the ENTER button.
• The surround parameter menu screen
reappears.
2 Tone defeat mode
If you do not want the bass and treble to be adjusted,
turn on the tone defeat mode.
Press the TONE DEFEAT button to turn on
the “Tone Defeat” mode.
The signals do not pass through the bass and
treble adjustment circuits, providing higher
quality sound.
Tone control setting
• Use the tone control setting to adjust the bass and
treble as desired.
• The tone control function will not work in the PURE
DIRECT, DIRECT or Home THX Cinema mode.
2 Adjusting the tone
1
Press the SURROUND PARAMETER
button.
•Display the surround parameter menu.
2
Press the CURSOR
DD
or
HH
button to
select the “TONE”.
The screen selected surround mode appears.
3
Press the CURSOR
FF
button.
• Switch to the “Tone Control” screen.
4
Press the CURSOR
GG
button to select
the “Tone Defeat OFF”.
You can adjust the channel level either according to
the playback sources or to suit your tastes, as
described below.
1
Press the ENTER button.
• Display the “Channel Vol.” screen.
2
Press the CURSOR
DD
,
HH
or ENTER
button to select the speaker.
Channels which is not used are not displayed.
FADER
SR
SBL
SL
SBR
FL
C
FR
SW
3
Press the CURSOR
FF
or
GG
button to
adjust the level.
Channel level
To increase the bass or treble:
The bass or treble sound can be increased to up
to +6 dB in steps of 1 dB.
To decrease the bass or treble:
The bass or treble sound can be decreased up to
–6 dB in steps of 1 dB.
The channel switches as shown below each time
the ENTER button is pressed.
The adjustment range for the different channels
is +12 dB to –12 dB in step of 0.5 dB.
The sound from the subwoofer can be
completely cut by lowering the SW (subwoofer)
setting one additional from –12 dB (setting it to
“OFF”).
• When the surround back speaker setting is set to
“1spkr” for “Speaker Configuration” ( page 53),
this is set to “SB”.
SURROUND
PARAMETER
TONE DEFEAT
ENTER
CURSOR
SURROUND
PARAMETER
ENTER
CURSOR