34
ENGLISH
Advanced Operation Advanced Operation
ENGLISH
Operating a component stored in the
preset memory
1
Press the MODE SELECTOR button for
the component you want to operate.
2
Operate the component.
4
Referring to the included List of Preset
Codes, press the
NUMBER to input the
preset code (a 4-digit number) for the
manufacturer of the component whose
signals you want to store in the memory.
• “OK” is displayed when the signals are
registered and the mode is terminated.
5
To store the codes of another component
in the memory, repeat steps 1 to 5.
NOTE:
• Depending on the model and year of
manufacture, this function cannot be used for
some models, even if the your device is listed on
the included list of preset codes.
• Some manufacturers use more than one type of
remote control code. Refer to the included list of
preset codes to change the number and check it
out.
2 The preset codes are as follows upon
shipment from the factory and after
resetting:
•TV, VCR1 ...............................................HITACHI
• CD, CDR, VDP, DVD, DVDR..................DENON
• VCR2, DBS............................................SONY
DVD preset codes
0000 (default) 0517
“FAIL” is displayed when the signals are not
registered, repeat steps 1 to 4.
DENON Model No.
DVD-550
DVD-700
DVD-900
DVD-1000
DVD-1400
DVD-1500
DVD-1710
DVD-1910
DVD-2200
DVD-800
DVD-1600
DVD-2000
DVD-2500
DVD-3000
DVD-3300
DVD-2800
DVD-2800
II
DVD-2900
DVD-2910
DVD-3800
DVD-3910
DVD-A11
DVD-A1
DVD-A1XV
For details, refer to the component’s operating
instructions.
Some models cannot be operated with this
remote control unit.
• For the DVD player remote control buttons, function
names may differ according to manufacturer.
Compare with the remote control operation of the
various components.
2. Video disc player (VDP) system
buttons
To Next Page
Loading...
