Denon AVC-A11XV - DM1000 (IC504) DIGITAL P.W.B.; Pin Assignment by Pin Number; DM1000 (IC701) ETHERNET P.W.B.

41
ENGLISH
ENGLISH
You can customize a variety of system setup so that it may be fitting for your listening environment.
For the contents of a system menu and the initial setting of this unit ( page 59 ~ 61).
Audio In Setup
*System Setup
You can change setting using the buttons on the front panel or remote control unit.
[ On screen display ]
[ Display ]
2
3
4
6
Digital In
*Audio In Setup
CD : COAX1
*Digital In
Exit
*System Setup
1
Press the AMP button (remote
control unit).
2
Press the SETUP button to display
the “System Setup Menu”.
Press the
CURSOR
DD
or
HH
button to
select the menu, then press the
ENTER button.
3
Press the ENTER button to enter the
selected menu.
4
To change a setting, first select it
using the
CURSOR
DD
or
HH
button,
then change the setting pressing the
CURSOR
FF
or
GG
button.
5
Press the ENTER button to set the
new settings.
6
Press the SETUP button to return
“System Setup Menu”, and again to
return the main screen.
CURSOR
F
AMP
SETUP
ENTER
CURSOR
G
CURSOR
H
CURSOR
D
ENTER
CURSOR F
CURSOR H SETUP
CURSOR G
CURSOR D
Navigating through the System Setup Menu
The AVC-A11XV is equipped with an intuitive and easy-to-understand on screen display, and is equipped with an
alpha-numeric front panel display tube that can also be used to check and adjust settings. We recommend that
you use the on screen display when you make system adjustments. Some representative front panel and on
screen display examples are shown below.
On screen display and front display
Advanced Setup – Part 1
[ On screen display ]
Top menu
Main menu
[ Front display ]
Auto Set/RoomEQ
*System Setup
Top menu
No.
Screen title
Sub-menu title
Speaker Setup
*System Setup
To select a menu, press the
CURSOR
DD
or
HH
button.
Digital In
*Audio In Setup
Main menu
No.
Screen title
Sub-menu title
Start
*Auto Setup
Press the CURSOR
FF
button to
execute.
Currently selected line
CD : COAX1
*Digital In
Current setting
The settings are changed
with the CURSOR
FF
or
GG
button.
Currently selected line
Meters : Feet
*Delay Time
Select either one pressing the
CURSOR
FF
or
GG
button.
Rename Clear
Rename TUNER
Press the CURSOR
HH
button to
select “Default”.
Advanced Setup – Part 1