57
ENGLISH
Advanced Setup – Part 2 Advanced Setup – Part 2
ENGLISH
When “Yes” is selected:
“Boundary Gain Compensation” can be selected
and the compensation set to “OFF”.
If the bass sound seems too strong:
Set “Boundary Gain Compensation” to “ON”.
This activates a filter that gently reduces very
deep bass below 55 Hz to provide the flattest
overall deep bass response. Select “ON” or
“OFF” according to how strong you prefer the
deep bass response to be.
4
Press the ENTER button.
• Return to the “THX Audio Setup” screen.
2
Press the CURSOR
FF
or
GG
button to
select the settings according to the
distances of the two surround back
speakers ( page 54 : ), then
press the
ENTER button.
• Return to the “THX Audio Setup” screen.
L11
3
Press the CURSOR
DD
or
HH
button to
select the “Exit”, then press the
ENTER
button.
• Return to the “Speaker Setup” menu
screen.
4
Press the CURSOR
DD
or
HH
button to
select the “Exit”, then press the
ENTER
button.
• The “System Setup Menu” reappears.
• When two surround back speakers have been set in
“Speaker Configuration” ( page 53), set the
distance of the speakers. There is not displayed
when “1spkr” selected.
• This setting is necessary to achieve the optimum
effect in the THX Surround EX, THX Ultra2 Cinema,
THX Music mode and THX Games mode. It is
recommended that SBL/SBR speakers are placed
together as close as possible.
1
Press the CURSOR
DD
or
HH
button to
select the “Surround Back Speaker
Position” at the “THX Audio Setup”
screen, then press the
ENTER button.
Surround back speaker position
Settings
Setting the Room EQ Setup
1
Press the CURSOR
DD
or
HH
button to
select the “Room EQ Setup” at the
“Auto Setup / Room EQ” menu, then
press the
ENTER button.
• Display the “Room EQ Setup” screen.
Select the setting of an Equalizer that has been set
with Auto Setup or Manual EQ.
All:
Sets the Equalizer for all surround modes.
Assign:
Sets the Equalizer individually for each surround
mode.
2
Press the CURSOR
FF
or
GG
button to
select the “All” or “Assign”.
3
-1
When “All” is selected:
q Press the
ENTER button.
• Display the “Select the EQ Curve”
screen.
3
-2
When “Assign” is selected:
After completing system setup, select
the desired equalizer setting using the
ROOM EQ button.
• Equalizer settings for the individual surround
modes can be stored in the memory.
Flat:
Adjusts the frequency response of all speakers to
the flattest response. This mode is suitable for
multi-channel music surround sound sources.
Manual:
Selects the setting value that was set in the
Manual EQ Setup.
For details of the “Setting the Manual EQ Setup”
( page 48).
Front:
Adjusts the frequency response of the surround
speakers to match the characteristics of the front
channel speakers.
4
Press the ENTER button to enter the
setting.
• The “Auto Setup / Room EQ” menu
reappears.
w Press the CURSOR
FF
or
GG
button to
select the Equalizer setting.
OFF:
The Equalizer is not used.
Audyssey:
Adjusts the frequency response of all speakers to
correct the effects of room acoustics.
Others Setup
Whenever the ROOM EQ button is pressed, the
display switches as shown below.
• The Equalizer setting of “Audyssey”, “Front” and
“Flat” can be selected after performing the Auto
Setup.
• When the speaker set as “None” with the Auto
Setup is changed to on manually, the equalizer of
“Audyssey”, “Front” and “Flat” cannot be used.
• The Equalizer setting can be selected directly by
ROOM EQ button.
• When headphones are connected, the Room EQ
cannot be used.
To Next Page
Loading...
