PageDefault settingsAdvanced Playback
PageDefault settingsVideo Setup
PageDefault settingsAudio Input Setup
60
ENGLISH
Advanced Setup – Part 2 Advanced Setup – Part 2
ENGLISH
42
Digital In
Assign
This assigns the digital input terminals for the different input
sources.
Input
source
Digital
Inputs
CD DVD VDP TV DBS VCR-1 VCR-2
COAX 1 COAX 2 COAX 3 OPT 1 OFF OPT 2 OPT 3
1
CDR /
TAPE
OPT 4
VCR-3
OFF
V.AUX
OPT 5
2 EXT.IN Setup Set the EXT. IN terminal playback method.
Surr.Sp = Surr.A, SW Level = +15dB
43
Input
Function Lev.
The playback level is corrected individually for the different input sources.
TUNER PHONO CD
CDR /
TAPE
DVD VDP TV
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
3
VCR-2
0 dB
DBS VCR-1
0 dB 0 dB
VCR-3
0 dB
V.AUX
0 dB
4
Function
Rename
The names of the different input source can be changed as desired and
displayed on the display.
43
5
IEEE1394
Assign
The connected IEEE1394 device can be automatically identified to assign
the input source.
–
43, 44
6
IEEE1394
Auto Func.
Set the function for associating playback of the connected IEEE1394
device on or off.
Auto Function = OFF
44
42
TUNER PHONO CD
CDR /
TAPE
DVD VDP TV VCR-2DBS VCR-1 VCR-3 V.AUX
4. Video Setup
2
Component
In Assign
HDMI/DVI In
Assign
This assigns the component video input terminals for the different input
sources.
The HDMI or DVI input terminals are assigned for the different input
sources.
Select the HDMI audio signal playback method.
DVD VDP TV
1
45
3
Video Convert
Mode
Set the input signal to be output from the monitor output terminal.
AUTO
45
44, 45
DBS VCR-1 VCR-2 VCR-3 V.AUX
1-RCA 2-RCA 3-RCA NONE NONE NONE NONE NONE
Audio Delay Set the audio delay timing to synchronize the sound and video.5
0 ms
46
On Screen
Display
This sets whether or not to display the on-screen display that appears on
the monitor screen when the controls on the remote control unit or main
unit are operated.
6
Function/Mode = ON, Master Volume = ON, Mode = Mode 1
46
DVD VDP TV DBS VCR-1 VCR-2 VCR-3 V.AUX
NONE NONE NONE NONE NONE NONE NONE NONE
4
HDMI Out
Assign
This sets whether or not to use the function for converting analog video
(composite video, S-Video or component video) signals into HDMI
signals.
When using this conversion function, set the color format and video
range of the signals output from the HDMI terminal.
Convert = ON, Color Space = Y Cb Cr, RGB Mode = Normal
46
3. Audio Input Setup
5. Advanced Playback
1
2
2ch
Direct/Stereo
Auto
Surround
Mode
Turn the audio compression on or off when down-mixing Dolby Digital
signals.
3
Dolby Digital
Setup
The speaker settings can be changed specifically for playing in the 2-
channel direct or stereo mode.
Set the Auto surround mode function.
Basic
OFF
Auto Surround Mode = ON
47
47
47, 48
4
This parameter is for optimizing the Room EQ with which the audio
signals are produced from the speakers.
Manual EQ
Setup
All Channels and Frequency = 0 dB
48
TUNER
OFF
To Next Page
Loading...
