24
AVR-5308CI / AVC-A1HD
●Mattersthatrequireattentionof
the assembling at the time of the
repair.
1. Attention when assemble RADIATOR
HOLDER on 1U-3833:DIGITAL VIDEO
UNIT.
(1) Paste up the PAD for heat conduction on the IC and
the RADIATOR.
※ Check nothing is dust on the surface of the PAD.
(2) Check nothing is chink between the PAD and the
parts, after attach the RADIATOR HOLDER to the 1U-
3833 :DIGITAL VIDEO UNIT.
(3) It is a regular state that is short-circuited No.30 pin and
GND (No.29 or No.31 pin) of the IC710 on the 1U-
3833:DIGITAL VIDEO UNIT .
RADIATOR HOLDER
RADIATOR
PAD
PAD
PADPAD
1U-3833
DIGITAL VIDEO UNIT
1U-3833
DIGITAL VIDEO UNIT
IC710
●修理時の組み立て注意点
1. 1U-3833 : DIGITAL VIDEO 基板に RADI-
ATOR HOLDER を取り付ける時の注意
(1) IC と RADIATOR に熱伝導用 PAD が貼ってあること。
※ PAD の表面に異物の付着が無いこと。
(2) 1U-3833:DIGITALVIDEO 基板に RADIATORHOLDER
を取り付けた後に PAD と部品に隙間がないか確認の
こと。
(3) 1U-3833:DIGITALVIDEO 基板:IC710 の No.30 ピン
と GND(No.29 または No.31 ピン ) が短絡されている
のは正規な状態です。