Denon AVC-A1XV - ZONE2 Tone Control Setting

159
ZONE2 tone control setting
• This function allows you to adjust the bass and treble of the ZONE2 audio output
during surround playback in ZONE2 to suit your tastes.
2
Press the SURROUND PARAMETER button.
Display the Surround Parameter menu on the ZONE2
monitor out.
The screen for the selected surround mode
appears.
1
3~6
2,8
7,8
1
Select the ZONE2 mode using the AMP/Z2 button.
(Remote control unit)
3
Select “TONE”.
CH SEL
ENTER
(Remote control unit)
4
Display the Tone Control screen.
CH SEL
ENTER
(Remote control unit)
5
Display the Tone Control screen.
Select Tone Defeat OFF.
If you do not want to the tone to be adjusted, set “Tone Defeat” to
“ON”.
CH SEL
ENTER
(Remote control unit)
6
q Select Bass or Treble.
CH SEL
ENTER
(Remote control unit)
w Select the level.
CH SEL
ENTER
(Remote control unit)
(Remote control unit)
7
Enter the setting.
The Surround Parameter menu screen re-appears.
CH SEL
ENTER
(Remote control unit)