Denon AVC-A1XV - Setting the HDMI;DVI in Assign

70
4-5. Setting the HDMI / DVI In Assign
1
Select “HDMI / DVI In Assign” at the Video Setup
menu.
2
Display the HDMI / DVI In Assign.
HDMI/DVI In
*Video Setup
DVD : NONE
*HDMI/DVI In
3
q Select the input source. w Select the input terminal.
Select from among HDMI1 to 3 and DVI-D.
If the same HDMI or DVI input terminal is selected, the setting for the input source that was previously assigned switches to “NONE”.
Select “NONE” for input sources for which both the HDMI and DVI input terminals are not used.
• This setting assigns the HDMI input terminals and DVI input terminal for different input sources.
• Select which input signal, HDMI or DVI, is to be output from which monitor out jack, HDMI or DVI.
• Set the method for playing the audio signals included in the HDMI input signal.
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
(Main unit) (Remote control unit)
Select the HDMI input terminal or DVI input terminal to be assigned to the input source.
Select the “HDMI” or “DVI” monitor output
terminal to be used.
This setting can be switched directly using the
MONITOR SELECT button on either the Main
unit or the Remote control unit.
(Main unit)
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Main unit)
(Remote control unit)
4
(Main unit) (Remote control unit)
Monitor : HDMI
*HDMI/DVI In