115
After completing system setup
This button can be pressed at any time during the system setup process to complete the process.
1
Press the SYSTEM SETUP button at the System Setup Menu, or select “Exit” and press the
ENTER button.
The changed settings are entered and the on screen display turns off.
(Main unit) (Remote control unit)
(Main unit)
(Remote control unit)
(Main unit)
(Remote control unit)
2 On screen display for component video outputs
• When viewing component video signals via the AVC-A1XVA, the on screen display is only displayed on the monitor when the “System
Setup” and “Surround Parameter” operations are performed and when the Remote control unit’s ON SCREEN button is operated.
• When only component video signals are input to the AVC-A1XVA or when “Component” is selected at the “Video Convert Mode settings”,
the characters of the on screen display are not displayed over the picture.
2 Checking the MAC Address
• The AVC-A1XVA’s MAC address is displayed.
• The MAC address differs for each set.
To Next Page
Loading...
