Denon AVC-A1XVA - Memory and Call-Out Functions of ZONE2 (USER MODE Function)

177
Memory and call-out functions of ZONE2 (USER MODE function)
• The AVC-A1XVA is equipped with a function for storing the input source, auto surround mode and input mode settings selected for the MAIN
ZONE and ZONE2 in the memory so they can be used whenever desired.
• For ZONE2, three patterns of settings can be stored in the memory using the USER MODE 1, 2 and 3 buttons on the Remote control unit.
• See page 150 for a description of the MAIN ZONE’s “USER MODE” function.
2 Storing the settings in the memory
1
Set the following to the desired status:
q ZONE2 input source
w ZONE2 auto surround mode
e ZONE2 input mode
3
Press and hold the USER MODE
button at which you want to store the
settings.
2 Calling the settings out
2
Select the USER MODE button at
which the settings you want to call out
have been stored.
2
Select the ZONE2 mode using the
AMP button.
(Remote control unit)
1
Select the ZONE2 mode using the
AMP button.
3
2
3
2
(Remote control unit)
(Remote control unit)
(Remote control unit)