o
Speaker Virtualizer
The Speaker Virtualizer enhances the surround and height speaker
channels to create an enveloping virtual surround effect.
On
(Default):
Enables “Speaker Virtualizer”.
Off: Disables “Speaker Virtualizer”.
0
You can set this when the sound mode is “Dolby Atmos”, “Dolby Surround” or
sound mode that has “+Dolby Surround” in the sound mode name.
0
Usable when not using height, ceiling or Dolby Atmos Enabled speakers, or
when not using surround speakers.
0
Audio is not output from the surround back speaker if “Speaker Virtualizer” is
set to “On” when “Speaker Config.” - “Surr. Back” is set to “1 spkr” in the menu.
o
DTS Neural:X
DTS Neural:X Expands the non-object based audio signals and
optimizes them for your speaker configuration.
On
(Default):
Use “DTS Neural:X”.
Off: Do not use “DTS Neural:X”.
0
You can set this when sound mode is “DTS:X” or “DTS:X MSTR”.
o
IMAX
Sets the audio mode for IMAX playback.
Auto
(Default):
Automatically enables the IMAX mode
when IMAX content is detected.
On:
Enables IMAX settings for IMAX
streaming content when automatic
detection is not possible.
Off: Disables the IMAX mode.
0
In case of streaming the IMAX contents from online streaming service using
TV Apps or player Apps (such as Blu-ray player’s App), this unit may not
detect the signal as IMAX contents automatically. In this case, you can enable
IMAX mode by setting this parameter to “On” manually.
0
This setting can only be turned “On” when DTS 5.1 channel content recorded
as IMAX DTS is input.
0
This setting cannot be set when headphones are used.
Contents Connections Playback Settings Tips Appendix
163
Front panel Display Rear panel Remote Index
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
