.
A
Power operation button (X)
Used to turn the power of the MAIN ZONE (room where this unit is
located) on/off (standby). (v p. 81)
B
Power indicator
This is lit as follows according to the power status:
0
Green: Power on
0
Off: Normal standby
0
Red:
0
When “HDMI Pass Through” is set to “On” (v p. 177)
0
When “HDMI Control” is set to “On” (v p. 179)
0
When “Network Control” is set to “Always On” (v p. 226)
C
SOURCE SELECT knob
This selects the input source. (v p. 81)
D
Remote control sensor
This receives signals from the remote control unit. (v p. 9)
E
Display
This displays various pieces of information. (v p. 20)
F
MASTER VOLUME knob
This adjusts the volume level. (v p. 82)
G
PURE DIRECT button
This switches the sound mode between Direct, Pure Direct and Auto
surround.
0
“Direct playback” (v p. 124)
0
“Pure Direct playback” (v p. 125)
0
“Auto surround playback” (v p. 125)
H
SOUND MODE button
Switching the sound mode. (v p. 122)
Contents
Connections Playback Settings Tips Appendix
18
Front panel Display Rear panel Remote Index
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
