.
E
HDMI connectors
Used to connect devices equipped with HDMI connectors.
0
“Connection 1 : TV equipped with an HDMI connector and
compatible with the ARC (Audio Return Channel) / eARC (Enhanced
Audio Return Channel)” (v
p. 74)
0
“Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel) / eARC
(Enhanced Audio Return Channel)” (v p. 76)
0
“Connecting a set-top box (Satellite tuner/cable TV)” (v p. 79)
0
“Connecting a DVD player or Blu-ray Disc player” (v
p. 80)
0
“Connecting a Blu-ray Disc player compatible with the Denon Link
HD function” (v
p. 81)
F
AC inlet (AC IN)
Used to connect the power cord. (v
p. 89)
G
SIGNAL GND terminal
Used to connect a ground wire for the turntable. (v p. 83)
H
TRIGGER OUT jacks
Used to connect devices equipped with the trigger function.
(v
p. 88)
I
REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this
unit and external devices from a different room. (v
p. 87)
J
RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner’s manual of the home
automation controller for more information about serial control of this
unit.
Perform the operation below beforehand.
A
Turn on the power of this unit.
B
Turn off the power of this unit from the external controller.
C
Check that the unit is in the standby mode.
Contents Connections Playback Settings Tips Appendix
26
Front panel Display Rear panel Remote Index
To Next Page
Loading...
