Denon AVC-X6800H - Page 231

o
ZONE2/3
When “Amp Assign” is “9.1ch + ZONE2/3-MONO”, the speaker
terminal used for the ZONE2/3 speakers is displayed. Depending on
the settings of Main Zone speaker configuration, the terminal is
determined automatically.
HEIGHT 3/FRONT WIDE:
The HEIGHT 3/FRONT WIDE speaker
terminal is used for the ZONE2/3
speakers.
HEIGHT 2:
The HEIGHT 2 speaker terminal is used
for the ZONE2/3 speakers.
HEIGHT 1:
The HEIGHT 1 speaker terminal is used
for the ZONE2/3 speakers.
o
View Terminal Config.
This shows how to connect the speaker terminals and PRE OUT
connectors for your “Speaker Layout” setting on the menu screen.
Contents Connections Playback Settings Tips Appendix
231
Front panel Display Rear panel Remote Index