Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
o
Unit
Set the unit of distance.
Meters (Default)
Feet
o
Step
Set the minimum variable width of the distance.
0.1 m / 0.01 m (Default: 0.1 m)
1 ft / 0.1 ft
o
Set the distance
0.00 m – 18.00 m / 0.0 ft – 60.0 ft
0
The speakers that can be selected differ depending on the “Amp Assign” and
“Speaker Config.” settings. (“Amp Assign” (v p. 214), “Speaker
Config.” (v
p. 224))
0
Default settings:
Front L / Front R / Center / Subwoofer 1 / Subwoofer 2 / F. Wide L / F. Wide R /
F. Height L / F. Height R / Front Dolby L / Front Dolby R / Center Height: 3.60
m (12.0 ft)
Speakers other than the above: 3.00 m (10.0 ft)
0
Set the difference in the distance between the speakers to less than 6.00 m
(20.0 ft).
Contents Connections Playback Settings Tips Appendix
230
Front panel Display Rear panel Remote Index
To Next Page
Loading...
