Denon AVR-A1H User Manual

Playback in ZONE2/ZONE3
.
USB
USB
VOLUME
df
POWER
X
MUTE
:
ZONE SELECT
Input source
select buttons
1
Press ZONE SELECT to switch the zone mode.
The K or L indicator lights.
2
Press POWER X to turn on the ZONE2 or ZONE3 power.
The j indicator on the display lights.
0
Power in ZONE2 or ZONE3 can be turned on or off by pressing
ZONE2 ON/OFF or ZONE3 ON/OFF on the main unit.
3
Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2 or
ZONE3.
0
To perform an operation with the main unit, press ZONE2
SOURCE or ZONE3 SOURCE. Each time you press ZONE2
SOURCE or ZONE3 SOURCE, the input source changes.
Contents
Connections Playback Settings Tips Appendix
178
Front panel Display Rear panel Remote Index

Denon AVR-A1H Specifications

General

Channels	15.4
Power Output	150 W per channel (8 ohms, 20 Hz - 20 kHz, 0.05% THD)
HDMI Inputs	7
HDMI Outputs	3
Dolby Atmos	Yes
DTS:X	Yes
IMAX Enhanced	Yes
Auro-3D	Yes
HEOS Built-in	Yes
Wi-Fi	Yes
Bluetooth	Yes
Weight	70.5 lbs
HDCP Support	HDCP 2.3
HDR Compatibility	HDR10, HDR10+, Dolby Vision, HLG
Wireless Audio	AirPlay 2, Bluetooth, HEOS
Phono Input	Yes
Frequency Response	10 Hz - 100 kHz
Voice Control	Amazon Alexa, Google Assistant, Apple Siri
Inputs	7 HDMI, 1 phono
Outputs	3 HDMI
Supported Audio Formats	MP3, WAV, FLAC, ALAC, DSD
Total Harmonic Distortion	0.05% (20 Hz - 20 kHz)